Description
The All In One Board comes as a fully assembled and tested board, with 5 pre set programed effects. header. Some light soldering is required if you’d like to plug it into a breadboard, or you can solder wires or directly to the breakout pads.
- Detailed specifications:
- ATmega328 microcontroller with Optiboot (UNO) Bootloader
- USB Programming and debugging via the well-supported genuine FTDI FT231X or the SiLabs CP2104
- Input voltage (Vin): 6-16V
- 5V logic with 3.3V compatible inputs, can be converted to 3.3V logic operation
- 20 Digital I/O Pins: 6 are also PWM outputs and 6 are also Analog Inputs
- 32KB Flash Memory – 0.5K for bootloader, 31.5KB available after bootloading
- 16MHz Clock Speed
- Black PCB with gold plate on pads
- 18mm x 44mm x 4mm / 0.7″ x 1.7″ x 0.2″
- Weight: 3g
